Aluminium(III) as a promoter of cellular oxidation

Aluminium has been known as a neurotoxic agent to experimental animals since the last century (Arch. Exp. Pharmacol. 40 (1897) 98). However, great interest arose in it bioinorganic chemistry as well biology when it was demonstrated to be the causative agent in pathologies related to the long-term dialysis treatment of uremic subjects with renal failure (Life Chem. 11 (1994) 197), and as a potential etiopathogenic cofactor for several neurodegenerative diseases. The inorganic biochemistry of aluminium is still largely to be discovered. In this review the pro-oxidative property of aluminium toward biological membrane will be presented and its implications in involvement in human pathology will be discussed in an interdisciplinary frame from the bioinorganic point of view.     

改性磁性壳聚糖微球对Cu2+、Cd2+和Ni2+的吸附性能

Fe3O4/ chitosan magnetic microspheres of 50 to 80 滋m were prepared using the inverse phase emulsion dispersion and chemical crosslinking technology, and then modified with ethylenediamine for use in the adsorption of heavy metal ions. The adsorption properties of the modified Fe3O4/chitosan toward Cu2+, Cd2+ and Ni2+ were investigated. It was found that the adsorption capacities of Cu2+ and Ni2+ increased with pH, and a maximum adsorption for Cd2+ occurred at pH=3. The saturated adsorption capacities calculated by Langmuir isotherms were 54.3 mg·g-1 for Cu2+, 20.4 mg·g-1 for Cd2+, and 12.4 mg·g-1 for Ni2+, respectively. The adsorption kinetics were well described by pseudo-second-order equation models. The experimental results showed that the Fe3O4/chitosan modified with ethylenediamine presented higher adsorption selectivity for Cu2+ than for Cd2+ and Ni2+ in all studied pH ranges.     

Zur Elektronenstruktur metallorganischer Komplexe der f‐Elemente. 64 Äußert sich die zwitterionische Natur des Triphenylphosphanoxid‐Liganden auch in seinen spektrochemischen Eigenschaften?

Electronic Structures of Organometallic Compounds of f Elements. 64 Does the Zwitterionic Nature of the Triphenylphosphine Oxide Ligand Manifest itself in its Spectrochemical Properties? The triphenylphosphine oxide mono adducts of the moiety tris(η⁵‐cyclopentadienyl)lanthanide(III) (Ln(Cp)₃; Ln = Pr ( 1 ), La ( 2 )) were synthesized and structurally characterized. The Ln–O distances of these compounds are noticeably shorter than those of the corresponding THF adducts. A crystal field (CF) analysis of the optical spectra of 1 leads to a low absolute value of the quadratic CF parameter which is comparable with those of [Pr(Cp)₃(L)]^? adducts with anionic bases but not with [Pr(Cp)₃(MeTHF)]. Reasons for the latter finding are presented.     

Oxidation of thiol compounds by molecular oxygen in aqueous solutions

Side self-oxidation of thiols was studied. It was found that these reactions in neutral and alkaline solutions are induced by impurities of variable-valence metals. The ability of transition metals to catalyze oxidation of thiols changes in the order Cu > Mn > Fe > Ni Co. The plot of the self-oxidation rate vs. pH passes through a maximum whose position on the pH scale depends on both the nature of metal and the structure of the thiol oxidized. For thiols having different structures, the kinetic orders in reactions catalyzed by copper ions differently vary with pH, which is apparently associated with the formation of complexes possessing different catalytic activity.     

On-site preconcentration and trace metal ions determination in the Okavango Delta water system, Botswana

Microcolumns containing 8-hydroxyquinoline azo-immobilized on controlled pore glass were incorporated in a field sampler for on-site collection, isolation and preconcentration of trace metal ions in waters of the Okavango Delta, Botswana. Sequestered trace metal ions were recovered by elution with 0.5 ml of 1.5 M nitric acid, and determined by graphite furnace atomic absorption spectrometry (GFAAS). This sampling and enrichment method minimizes sample contamination, and collection of large volumes of water samples for transporting, over long distances, to analytical laboratories is avoided.Data reported comprise one of the initial surveys on trace metal ion concentrations in waters of the Okavango Delta, Botswana. In waters with more efficient mixing, dissolved metal ion concentrations found were generally low with slightly elevated levels of manganese (7-19 μg l⁻¹), zinc (2.7-4.8 μg l⁻¹), nickel (0.2-2.5 μg l⁻¹) and copper (0.3-2.1 μg l⁻¹). For each trace metal ion, concentration levels seem to reflect zones of varying water conveyance, and show no obvious temporal and spatial variations apart from a slight increment from the inlet in the upper Delta to the outlets in the lower Delta.     

水中痕量酚的富集和紫外分光光度测定法的研究

本文研究了用微型树脂柱快速富集,分离,紫外分光光度测定水中痕量酚的方法。结果表明,以GDX-502为吸附剂,水样pH为1～3并含0.2mol/L氯化钠,以每分种15～20ml的速度通过吸附柱,以热的1％氢氧化钠水溶液为淋洗剂时,在291nm处测定苯酚的回收率为89～98％。此外探讨了干扰物的消除方法。吸附柱对苯酚的富集倍数达300倍,最低检测限为0.001ppm。方法精密度为0.3(％),相对标准偏差为3.18％。本法对实际水样进行了测定。结果满意。     

Formation of Negative Hydrogen Ions in a Ne–H2 Hollow Cathode Discharge

The formation of negative hydrogen ions in a conventional hollow cathode discharge has been investigated. A mixture of Ne and H₂ proved to be more advantageous compared to pure hydrogen. The study has been performed by solving the electron Boltzmann equation, coupled with a system of balance equations for neon and hydrogen neutral and charged particles. The vibrational distribution function of hydrogen has been calculated. Our calculations show unusually high population of vibrationally excited hydrogen molecules in a Ne–H₂ mixture, which explains the high density of negative hydrogen ions under optimal conditions (total gas pressure of few Torr, hydrogen number mole fraction of 1–10% and discharge current of 10–100 mA). Line intensities originating from highly excited neon states vs. hydrogen pressure have been calculated and a comparison with existing experimental results has been made.     

Limiting Partial Molar Volumes of Electrolytes in 2-Methyl-2-Butanol <Emphasis Type="Bold">+</Emphasis> Water Mixtures at 298.15 K

Partial molar volumes at infinite dilution, V⁰₂, of alkali–metal halides (LiCl, NaCl KCl RbCl CsCl, NaBr, KBr, KI), tetra-n-alkylammonium bromides, R₄NBr (R=Me, Et, n-Pr, n-Bu, n-Pen), NaBPh₄, and Ph₄PCl have been determined in binary solvent mixtures of water with 2-methyl-2-butanol covering the water-rich region and the alcohol-rich region at 298.15 K. V⁰₂ for alkali–metal halides show relatively little dependence on the solvent composition. However, in the case of hydrophobic electrolytes the observed effects are more pronounced. A good linear dependence between V⁰₂(R₄NBr) and the molecular weight of the tetra-n-alkylammonium cation is found. Limiting single-ion volumes have been obtained using the assumption that V⁰(Ph₄P⁺)–V⁰(BPh^–₄)=2.0 cm³-mol^–1. The trends in the single-ion volumes are discussed in both solvent regions.     

Pulse radiolysis study of I− oxidation with radical anions Cl2 ⋅− in an aqueous solution

Radiation-chemical transformations of chloride solutions in the presence of iodide additives were studied by pulse radiolysis. Radical anion Cl₂ ^⋅− oxidize I⁻ ion, while in the secondary reactions Cl₂ reacts with I⁻ to form a mixed trihalide ion ICl₂ ⁻. A reaction model that satisfactorily describes the experimental data was proposed. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1336–1340, June, 2005.     

Use of a Carbon Paste Electrode Modified with Spinel‐Type Manganese Oxide as a Potentiometric Sensor for Lithium Ions in Flow Injection Analysis

A potentiometric sensor constructed from a mixture of 25% (m/m) spinel‐type manganese oxide (lambda‐MnO₂), 50% (m/m) graphite powder and 25% (m/m) mineral oil is used for the determination of lithium ions in a flow injection analysis system. Experimental parameters, such as pH of the carrier solution, flow rate, injection sample volume, and selectivity for Li⁺ against other alkali and alkaline‐earth ions and the response time of this sensor were investigated. The sensor response to lithium ions was linear in the concentration range 8.6×10^?5–1.0×10^?2 mol L^?1 with a slope 78.9±0.3 mV dec^?1 over a wide pH range 7–10 (Tris buffer), without interference of other alkali and alkaline‐earth metals. For a flow rate of 5.0 mL min^?1 and a injection sample volume of 408.6 μL, the relative standard deviation for repeated injections of a 5.0×10^?4 mol L^?1 lithium ions was 0.3%.